Cisco Systems 7600 Router User Manual


 
2-9
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
OL-10100-04
Chapter 2 Route Switch Processors and Supervisor Engines
RSP720 with 10GE Uplink Ports
10 gigabits per second (Gbps) on both 10GE ports
1 Gbps on all three 1GE ports
16 Gbps backplane forwarding
When all five uplink ports are operational, the total bandwidth for uplink traffic is 20 Gbps (20 GE).
The RSP720-10GE provides flexible memory options like the RSP720. The RSP720-10GE ships
with 2-GB memory on the route processor (RP) and 1-GB memory on the switch processor (SP).
Memory options are available to upgrade to 4-GB memory on the RP and 2-GB memory on the SP.
The RSP720-10GE supports Route Processor Redundancy (RPR) mode. However, uplink ports on
the standby supervisor will be unusable.
See the “RSP720-10GE Usage Guidelines and Limitations” section on page 2-10 for information about
things to consider when you use the RSP720-10GE.
Supported Chassis, Line Cards, and Modules
The RSP720-10GE supports the following chassis and modules:
Supported on the Cisco 7604 and 7609 chassis and the Cisco 7603-S, 7606-S, and 7609-S chassis
Note If you insert an RSP720-10GE into an unsupported chassis, the RSP720-10GE drops to
ROMmon and only the console is accessible.
SPA interface processors (SIPs) and their shared port adapters (SPAs): 7600-SIP-600,
7600-SIP-400, and 7600-SIP-200
Enhanced FlexWAN module (WS-X6582-2PA)
Ethernet services modules: 2-port 10 GE line card (7600-ESM-2X10GE) and 20-port 1 GE line card
(7600-ESM-20X1GE)
Distributed Forwarding Cards: DFC3C, DFC3CXL, DFC3B, DFC3BXL
LAN cards (which require CFC or DFC): WS-X6704-10GE, WS-X6724-SFP, WS-X6748-SFP,
WS-X6748-GE-TX, WS-X6708A-10GE, WS-X67xxA series, WS-X6148-FE-SFP,
WS-X6148A-GE-TX
Uplink port transceiver modules: see Appendix B, “Cable and Connector Specifications”
Note The RSP720-10GE also supports two new 8-port 10GE line cards (WS-X6708-10G-3C and
WS-X6708-10G-3CXL). The line cards, which provide 2-to-1 oversubscription, are
available in Cisco IOS Release 12.2SRC and later.
Unsupported Chassis and Modules
The RSP720-10GE does not support the following chassis and modules:
Unsupported chassis: Cisco 7603, 7606, and 7613 chassis
Unsupported modules: Services modules, Optical Service Modules (OSMs), FlexWAN module
Unsupported Features
In Cisco IOS Release 12.2SRC, the RSP720-10GE does not support the following features, which are
supported on the RSP720: