CHAPTER
2-1
Cisco 3600 Series Routers Hardware Installation Guide
OL-2056-05
2
Preparing to Install the Router
This chapter describes site requirements and equipment needed to install your Cisco 3600 series router.
It includes the following sections:
• Safety Recommendations, page 2-1
• General Site Requirements, page 2-3
• Installation Checklist, page 2-6
• Creating a Site Log, page 2-7
• Inspecting the Router, page 2-7
• Tools and Equipment for Installation and Maintenance, page 2-8
• Console and Auxiliary Port Considerations, page 2-9
• Preparing to Connect to a Network, page 2-10
After you have completed this chapter, proceed to Chapter 3, “Installing the Router” for installation
instructions.
Safety Recommendations
Follow these guidelines to ensure general safety:
• Keep the chassis area clear and dust-free during and after installation.
• If you remove the chassis cover, put it in a safe place.
• Keep tools and chassis components away from walk areas.
• Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
• Wear safety glasses when working under conditions that might be hazardous to your eyes.
• Do not perform any action that creates a hazard to people or makes the equipment unsafe.
Safety with Electricity
Follow these guidelines when working on equipment powered by electricity:
Warning
Read the installation instructions before connecting the system to the power source.
Statement 1004