CHAPTER
3-1
Cisco 3600 Series Routers Hardware Installation Guide
OL-2056-05
3
Installing the Router
This chapter describes how to install your Cisco 3600 series router and connect it to networks and
external devices. It contains the following sections:
• Installing Modules, Interface Cards, and Power Supplies, page 3-2
• Installing the Chassis, page 3-3
• Installing Chassis Ground Connection, page 3-19
• Power Connections, page 3-27
• Connecting WAN, LAN, and Voice Cables, page 3-37
• Connecting to a Console Terminal or Modem, page 3-43
• Powering Up the Router, page 3-51
• Configuring the Router, page 3-53
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Note See the “Tools and Equipment for Installation and Maintenance” section on page 2-8 for a list of tools
and equipment that might be required for your installation.