Filter
Top Products
3-37
Cisco 3600 Series Routers Hardware Installation Guide
OL-2056-05
Chapter 3 Installing the Router
Connecting WAN, LAN, and Voice Cables
Connecting WAN, LAN, and Voice Cables
This chapter describes how to connect the WAN, LAN, and voice interface cables. It includes the
following sections:
• “Ports and Cabling” section on page 3-37
• “Connections for Cisco 3620, Cisco 3640, and Cisco 3631 Routers” section on page 3-39
• “Connections for Cisco 3660 Routers” section on page 3-39
Note One or two Ethernet cables are typically provided with the router. Additional cables and transceivers can
be ordered from Cisco. For ordering information, refer to the Cisco Product Catalog at
http://www.cisco.com/en/US/products/products_catalog_links_launch.html. For cable pinouts, refer to
the Cisco Modular Access Router Cable Specifications document available online and on the
Documentation CD-ROM.
Warning
Do not work on the system, or connect or disconnect cables during periods of lightning activity.
Statement 1001
Ports and Cabling
Table 3-4 summarizes some typical WAN, LAN, and voice connections for Cisco 3600 series routers.
The connections summarized here are also described in detail in the following documents:
• Cisco Modular Access Router Cable Specifications
• Cisco Network Modules Hardware Installation Guide
• Cisco Interface Cards Hardware Installation Guide
You can access these documents at the location described in the “Obtaining Documentation” section on
page xvii.