Filter
Top Products
2-6
Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide
OL-23778-01
Chapter 2 Preparing to Install the Router
Site Planning
11. Check the required tools list to make sure the necessary tools and test equipment are available (see
the “Required Tools and Equipment” section on page 2-6).
12. Perform the installation.
Unpacking and Checking the Contents of your Shipment
The shipping package for the Cisco ASR 901 router is designed to reduce the possibility of product
damage associated with routine handling experienced during shipment. Do not remove the router from
its shipping container until you are ready to install it.
Note Do not discard the packaging materials used in shipping your Cisco ASR 901 router. You will need the
packaging materials in the future if you move or ship the router.
The Cisco ASR 901 router, cables, and any optional equipment you ordered may be shipped in more than
one container. When you unpack the containers, check the packing list to ensure that you receive all of
the following items:
• Router
• Accessory kit (part number 53-3085-01/53-3295-0 for the Cisco ASR 901), containing
–
Terminal block (part number 53-3085-01)
–
Two hole lug, 6-AWG ground wire, #10 blue stud (part number 32-0629-01)
–
Two pan-head Phillips screws used to attach the lug to the router, M5.0x10mm
–
Two cable guides (part number 700-01663-01)
–
Two pan-head Phillips screws used to attach the cable guides, M4,0x20mm (part number
48-0654-01)
Note There is no AC power option.
• Cisco Information Packet publication
Inspect all items for shipping damage. If an item appears to be damaged, or if you encounter problems
installing or configuring your router, contact customer service. The Cisco Information Packet provides
warranty, service, and support information.
Required Tools and Equipment
You need the following tools and equipment to install and upgrade the router and its components:
Warning
Only trained and qualified personnel should be allowed to install or replace this equipment.
Statement 49
• ESD-preventive cord and wrist strap.
• Number 2 Phillips screwdriver.
• Flat-blade screwdrivers: small, 3/16-inch (0.476 cm) and medium, 1/4-inch (0.625 cm).