Filter
Top Products
15
Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments
OL-13140-02
Command Reference
Command Reference
This section documents the module-specific IOS router commands that are used to configure the WAE
network module from the router command-line interface (CLI). All other IOS software commands used
with this feature are documented in the IOS Release 12.4(9) T command reference publication.
The network module is also known as the integrated-service-engine within the IOS CLI.
• interface integrated-service-engine, page 16
• service-module integrated-service-engine default-boot, page 17
• service-module integrated-service-engine reload, page 18
• service-module integrated-service-engine reset, page 19
• service-module integrated-service-engine session, page 21
• service-module integrated-service-engine shutdown, page 23
• service-module integrated-service-engine statistics, page 25
• service-module integrated-service-engine status, page 26
• show controllers integrated-service-engine, page 28
• show interfaces integrated-service-engine, page 33
• show diag, page 30—Modified command