Cisco Systems NME-WAE Saw User Manual


 
4
Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments
OL-13140-02
Cisco WAE Network Module Hardware Description
Figure 1 NME-WAE Faceplate and LEDs
CF Not used
Shutdown Press the Shutdown button for greater than 4 seconds to cause an immediate module
shutdown, which may impact file operations that are in progress.
CF card CompactFlash memory card
LINK Status of Gigabit Ethernet link
On—Link is enabled
Off—Link is disabled
ACT Status of Gigabit Ethernet activity
On—Active
Off—Inactive
DISK Status of hard drive activity
On—Active
Off—Inactive
SYS Status of system shutdown
On—System is shut down and ready for host power down
Off—Application is stable
Flashing—System shutdown is in progress
EN Status of the network module
On—Detected by the host IOS software and enabled
Off—Disabled
170900
SHUTDOWN:
GRACEFUL <1 s
IMMEDIATE >4 s
CF
LINK ACT
SYS
DISK
EN
GigE
USB
NOT
SUPPORTED
NM-WAE-XXX-K9
XXX-XXXXX-XX XX
CF
Shutdown
LINK ACT DISK
SYS
CF card
EN
Never remove compact
flash during operation
Shut down
application
before removing or
power cycling.