Filter
Top Products
22
Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments
OL-13140-02
service-module integrated-service-engine session
The following example clears the session that had been used to configure the ISE in the network module
in slot 2:
Router# service-module integrated-service-engine 2/0 session clear
[confirm]
[OK]
Related Commands Command Description
enable Enters privileged EXEC mode.
interface Configures an interface and enters interface configuration
mode.
show diag Displays controller information for a network module.
show interface integrated-service
engine
Displays basic interface configuration information for network
modules.