Filter
Top Products
4. Loosen the setscrew which locks the blade guide
support and push the support all the way back.
Repeat for lower blade guide support.
UPPERBLADE tl t
GU,DEsuPPO.TII_l-r L
SETSCREW _
"<_-_-"_,J/l[I L.U ql I '1 GUIDE SUPPORT
_---_--_--'=_ SETSCREW
5. Loosen the setscrew which locks the upper back
up bearing and push the bearing all the way
back. Repeat procedure for lower back up bear-
ing.
_f UPPER BACKUP
BEAR NG SETSCRE_
LOWER BACKUP
BEARING SETSCREW
WARNING: TO AVOID SERIOUS EYE INJURY OR
SCRAPES IF THE BLADE SHOULD SUDDENLY
UNCOIL, WEAR SAFETY GOGGLES. CAREFULLY
UNCOIL THE BLADE HOLDING IT AT ARMS
LENGTH.
6. Uncoil the blade.
7. Place the blade over the wheels with the teeth
pointing downwards toward the table as shown.
Make sure the blade is between the blade guides
and is in the center of the rubber tires.
NOTE: If the blade wi!t not reach around both
wheels, lower the upper wheel by turning the tension
knob counterclockwise.
BLADE CENTERED
ON RUBBER TIRE
27