Craftsman 113.29921 Saw User Manual


 
Rip Fence
The fence should slide easily along the guide bars and
always remain in alignment (parallel to sawblade and
miter gauge grooves),
The alignment is maintained by a spring underneath the
fence which bears against the front guide bar
To move the fence, loosen the lock handle and grasp the
fence with one hand at the front
For very close adjustments, grasp the guide bar w{th both
hands and move the fence with your thumbs
®
Self Aligning Spring Adjustment
Checking the Fence Spring
1 Place fence on saw but do not lock it
2 Move the rear end of the fence slightly to the right or
left, When you release it, the fence shouid "spring"
back to its original position
3 ff itdoes net, the spring pressure must be increased,
37