Filter
Top Products
The following tools are needed for assembly and alignment. Note: The five hex keys listed below have been
provided with your saw. The remaining tools are typical shop tools and are not included with your saw.
8MALL/ MEDIUM
PHILLIPSSCREWDRIVER
NUTDRIVER
8 ram,10 ram,and12 mm
HEXKEY8 (PROVIDED)
and6 mm
COMBINATIONSQUARE
HAMMER
45°TRIANGLE
WREN_HES:8 ram,10 ram,and12 mm
,_, "
FRAMINGSQUARE
13 rRRF'rSMRN*TABLESAW315.228390