Filter
Top Products
[<_ t _k WARNING
When Mounting an Auxiliary Fence Face, Position Mounting Hardware Beyond Arrow at Right and Left as indicated,
Keep Fasteners Away From Blade.
C
D
I Do Not Lift Saw With Railsor Extension Tables.
WARNING
• Attach Blade Guard
Assembly Before
Operating this Saw
• Read Owners
G
LL ON I
PUSH OFFOI_
WARNING
Debris on rail can misalign
the rip fence. Workpiece
could bind or suddenly
kick back. You could be
hit or cut. Clean debris
off fence rail before
positioning fence•
II:RRFTSMRN
I I* Read manual before using saw.
• Wear safety goggles that meet ANSI Z87.1
standards.
• Do not reach around or over saw blade.
• Keep blade guard down and in place for
through cuts.
• Do not make freehand cuts.
Keep hands out of path of saw blade.
_. WARNING
• When ripping, use push stick when fence is set 2 inches or less from
blade.
• Know how to reduce the risk of kickback. See instructions for ripping.
• When ripping, use push block and auxilary fence when fence is set
between 1/2 and 2 inches from blade.
• DO not make rip cuts narrower than 1/2 inch.
• Turn power off and wait for blade to stop before adjusting or servicing.
Fig. 4 b
15 rRRFI"$MRN _TABLESAW315.228390