Filter
Top Products
HOUSING
23 - 3
ETC00781(4) Series 100 e 02/2004
23.2.2 BINOS
®
100 2M
a) Housing Cover
P Disconnect all voltage supplies.
P Unscrew fastening screws for rack mounting / front frame if necessary (Fig. 1-2, Item 11).
Remove analyzer out of rack or remove the front mounting frame and carrying strap to rear.
P Unscrew the respective fastening screws at both housing sides (Fig. 23-1)
P Remove the respective housing top cover panel.
Closing the housing is performed in reverse order.
OPENING THE HOUSING (BINOS
®
100 2M)
fastening screws housing cover
Fig. 23-1: BINOS
®
100 2M
(Fastening screws housing cover)