Filter
Top Products
CABLES AND CORDS
30 - 2
ETC00781(4) Series 100 e 02/2004
230/120 V AC INPUT / ANALOG SIGNAL OUTPUT
*)
BINOS
®
100 2M/F from program version 5.0 or hoigher only
30.2 230/120 V AC Input (BINOS
®
100 2M, UPS power supply)
03 861 008 Supply voltage cord to connect a BINOS
®
100 2M with mains, 1 m
(for Germany only [Schuko plug])
Other locations:
Use cords with an IEC60320 female at one end and an appropriate
plug at the other end to meet your local requirements!
Power cords must have a separate grounding conductor!
In case of doubt contact your local Emerson Process Management sales
office to order an appropriate cord!
30.3 Power Supply for Wall Mounted Analyzers (BINOS
®
100 F)
Power cords must have a separate grounding conductor!
Variation 1
Use cords with an appropriate plug at the one end to meet your local
requirements and single conductors at the other end, to be connected to
the terminals inside the analyzer.
In case of doubt contact your local Emerson Process Management sales
office to order an appropriate cord!
Variation 2
For permanently connected equipment use cords rated to meet your local
requirements and single conductors at the other end, to be connected to
the terminals inside the analyzer.
In case of doubt contact your local Emerson Process Management sales
office to order an appropriate cord!