Filter
Top Products
SAFETY SUMMARY
S - 3
ETC00781(4) Series 100 e 02/2004
GENERAL / GASES AND GAS CONDITIONING (SAMPLE HANDLING)
Do not open instrument when energized !
Component replacement and internal adjustments requires servicing by
qualified personnel only !
Read this instruction manual before attempting to operate the instrument !
Be sure to observe the additional notes, safety precautions and warnings
given in the instruction manual !
Operate analyzer as table-top version or as rack-mountable version (built-in) only
(except of BINOS
®
100 F: designed for wall mounting only) !
Do not operate the instrument in the presence of flammable gases or explosive
atmosphere without supplementary protective measures !
Hot components may exist at the photometer or in heated versions !
BINOS 100 F
The analyzer has a weight of approx. 30 - 35 kg.
Lift or carry this unit with at least 2 persons.
For easy transport use a suitable cart or comparable tools.
Verify that the cable fittings with installed cables are hermetic to be
in agreement with protection class IP 65 (according to DIN standard 40050).
The permissible outside diameters of the cables are 7 to 12 mm !
The analyzer is intended to be wall mounted. Use bolts which are
suitable for the weight of the unit and appropriate anchors.
Make sure the wall where the analyzer is intended to be mounted is solid to
hold the analyzer!