Filter
Top Products
6 - 2
SWITCHING ON
ETC00781(4) Series 100 e 02/2004
6.2 24 V DC Supply
The analyzers of series 100 (with except of BINOS
®
100 F and BINOS
®
100 2M with internal power
supply) are specified for an operating voltage of 24 V DC. This voltage has to be provided via
a 3-pole XLR flange (male).
The DC supply voltage has to be provided by one of the optional power supplies VSE 2000,
UPS 01 T, DP 157, SL5, SL10 or an equivalent power supply.
P Connect power supply and analyzer (Fig. 6-1, Plug 24 V DC).
Verify correct polarity before operation (Fig. 29-1) !
P Connect mains line and power supply.
Be sure to observe the safety precautions and warnings given by
manufacturer of power supply !
6.3 230/120 V AC Supply
Fig. 6-1a: BINOS
®
100 (M), OXYNOS
®
100 (EO
2
), HYDROS
®
100, Voltage supply
24 V DC SUPPLY
MADE IN GERMANY
X3 OUTPUT
X2 OUTPUT
INTERFACE
X1 OUTPUT
24 V
max. W
12+ 1
3
Plug 24 V DC
Input