Filter
Top Products
– 8 –
7.2 Function and indication of indication/operation panel
This panel consists of the following functions.
Key Function Main indication Sub indication Function indication lamp
FUNC Measuring mode Measuring value Range MEAS lamp lights
Setting mode
FUNC Calib.conc.setting Calb.conc. Range CAL SET lamp lights
FUNC Alarm setting (option) Alarm value ALM SET lamp flickers*
FUNC Hold setting ON or OFF HOLD lamp flicker
FUNC Remote range setting (option) ON or OFF RMT RANGE lamp flickers*
FUNC Current time setting Hr.min. Day Auto CAL lamp flickers
FUNC Auto clib.start time setting HR.min. Day AUTO CAL lamp flickers
FUNC Auto calib.cycle setting Time AUTO CAL lamp flickers
FUNC Calib. gas flow time setting Time AUTO CAL lamp flickers*
FUNC Calib. gas flow time setting Mode No. AUTO CAL lamp flickers*
FUNC Auto calib.changeover ON or OFF AUTO CAL lamp flickers
FUNC Key lock changeover ON or OFF *
ZERO Zero calibration Measured value Range Zero key indication flickers
ZERO Span calibration Measured value Range Span key indication flickers
• When the setting mode is assumed, the analog output signal is held at the value just before entering this mode.
• When optional functions are not provided, the contents of these functions are not indicated.
* Refer to the instruction manual of the infrared gas analyzer for the items marked by the asterisks.
Auto calibration (option)
▲