Filter
Top Products
– 22 –
8.7.3 Auto calibration cycle setting
The calibration cycle is settable in either ‘days’s or ‘hours’.
Press the FUNC key at the calibration start time indica-
tion and ‘ ’ will appear.
The AUTO CAL LED of the function indicating lamps
will flicker.
Press the key and the auto calibration cycle is settable.
The highest digit on the sub indication will flicker. Select
either ‘days’ or ‘hours’ by pressing the key.
‘ ’ appears on the sub indication when selecting
‘days’ and ‘ ’ appears when selecting ‘hours’.
Press the key and the calibration cycle and be set in
the lower digits of the sub indication.
The numeric value is incremented by pressing the
key.
Press the key and the digit can be selected.
Day is settable in a range of 1 to 7 days. Hour is
settable in a range of 1 to 99 hours.
Note
If ‘0 0’ (hours) is set, it will be automatically set
to ‘1’(hours).
Press the ENT key when the calibration cycle has been
set. The data are saved.
NO
NO
NO
NO
ENT
NO
FUNC
AUTO CAL
( )
( )