Filter
Top Products
– 21 –
8.7.2 Auto calibration start time setting
When FUNC key is pressed at the current time indica-
tion, the auto calibration start time and day will appear on
the main and sub indications.
The AUTO CALLED of the function indicating lamps
will flicker. In the case of start time, the decimal point on
the main indication will light steadily.
Press the key and the auto calibration start time is
settable, so set a start time on the main indication.
The numeric value is incremented by pressing the
key.
Press the key and the digit can be selected.
After setting the calibration start time, press the key
and the calibration start day can be set on the sub indica-
tion.
The bar indication will flicker.
Press the key and the bar will shift.
The auto calibration start time is settable up to one
week ahead.
When the auto calibration start time and day have been
set, press the ENT key. The data are saved.
When the auto calibration at the set time is fin-
ished, the next auto calibration start time will be
set automatically.
To confirm the next auto calibration start time, then
carry out this operation and check the indication.
Note: When the auto calibration start time has been set, then set the auto calibration cycle.
NO
NO
NO
NO
ENT
NO
FUNC
AUTO CAL
( )
( )
SU TU TH SA
MO WE FR
SU TU TH SA
MO WE FR
SU TU TH SA
MO WE FR
SU TU TH SA
MO WE FR
SU TU TH SA
MO WE FR
Lights