Filter
Top Products
– 1 –
1. OUTLINE
The infrared gas analyzer (ZSP) can continuously and accurately measure the concentration of gases such as NOx,
SO
2
, CO, CO
2
and O
2
contained in the flue gas from a stationary generating source. The analyzer is available in
both single-component and multi-component types depending on customer’s specification. The actual analyzer
may somewhat differ from the descriptions in this manual depending on the specifications demanded by each
customer. For outline diagram, piping system, hardware configuration, specifications, standard accessories, spares
and supplies, refer to the delivery specifications submitted individually.
Note: For details of the infrared gas analyzer, refer to the instruction manual INZ-TN2 ZRG separately
prepared.
2. SPECIFICATIONS
Please refer to Chapter 14. Specifications. Note that the contents of the separately issued data sheet have priority.
3. COMPOSITION
(1) Gas sampling section 1 set (depending on customers’ designation)
(2) Gas piping 1 set (depending on customers’ designation)
(3) Accommodation locker 1
Infrared gas analyzer ZRG 1 or 2 (depending on customers’ designation)
Zirconia O
2
sensor ZFK 3, 4 1 (depending on customers’ designation)
Converter ZDL 1 (for NO
x
measurement)
Sampling 1 set
Standard gas, pressure regulator 1 set (depending on customers’ designation)
Standard accessories 1 set
Spares and supplies for 1 year 1 set (depending on customer’s designation)