Filter
Top Products
– 20 –
8.7.1 Current time setting
Set the current time and day of the week.
Press the FUNC key in the measuring status.
The AUTO CAL LED of the function indicating lamps
will flicker.
The main indication shows the hour and minute via a
24-hour indication and the decimal point flickers.
A’–’ bar lights up at the relevant weekday on the sub
indication.
Indication
SU MO TU WE TH FR SA
Day Sun. Mon. Tue. Wed. Thu. Fri. Sat.
Press the key and the time is now settable.
The highest two digits of the main indication will flicker.
The numeric value is incremented by pressing the ‘ ’.
Press the key and the digit can be selected.
After the time setting, press key and the day is settable
on the sub indication.
The bar indication will flicker.
Press the key and the bar will shift.
Press the ENT key when the time and day setting is fin-
ished. The data are saved.
Time starts from the point where ENT key is
pressed.
NO
NO
NO
ENT
NO
FUNC
AUTO CAL
( )
( )
SU TU TH SA
MO WE FR
SU TU TH SA
MO WE FR
SU TU TH SA
MO WE FR
SU TU TH SA
MO WE FR
Flickers