Filter
Top Products
– 13 –
[When adjusting for each range]
(Simultaneous calibration of H and L ranges has been factory-set).
Perform setting in the following way.
By pressing CAL key while the highest digit of the
main indication for the 1st component is flickering,
then ‘ ’ will appear on the main indication and
‘ ’ will appear on the sub indication.
Press key and will change to .
= Meaning of set values =
: The calibration is valid only for the selected
range, and zero and span calibration can
be made independently for each range.
: By conducting zero and span calibration
for one range, the calibration will be done
automatically for the other ranges as well.
When the selection has been finished, press the ENT
key. Setting operation is completed.
ENT
CAL
NO
NO
NO
NO