Filter
Top Products
Model G0757Z (Mfd. Since 02/15)
-5-
Controls &
Components
Refer to Figures 1–4 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Control Panel
Master Power Switch
Figure 1. Location of master power switch.
Master
Power Switch
Master Power Switch: Enables power to flow to
machine.
A. Vertical Spindle RPM Readout: Displays
current spindle RPM.
B. FORWARD Button (Vertical Spindle
):
Starts vertical spindle forward rotation (clock-
wise looking down on headstock).
C. REVERSE Button (Vertical Spindle
):
Starts vertical spindle reverse rotation (coun-
terclockwise looking down on headstock).
D. STOP Button (Vertical Spindle
): Stops
vertical spindle rotation.
E. FORWARD Button (Horizontal Spindle
):
Starts horizontal spindle forward rotation (coun-
terclockwise as viewed from front of machine).
F. REVERSE Button (Horizontal Spindle
):
Starts horizontal spindle reverse rotation (clock-
wise as viewed from front of machine).
G. STOP Button (Horizontal Spindle
): Stops
horizontal spindle rotation.
H. Variable-Speed Dial: Controls speed of ver-
tical spindle.
Spindle rotation direction can ONLY be
changed when spindle is completely
stopped.
Figure 2. Control panel.
A
B
C
D
E
F
G
I
J
K
H