Filter
Top Products
-82-
Model G0757Z (Mfd. Since 02/15)
Labels & Cosmetics
G0757Z
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
grizzly.com
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
MODEL G0757Z
V.S. HORIZONTAL/
VERTICAL MILL
To reduce the risk of serious personal injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in moving parts—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
7. Properly set up machine before starting.
7. Always remove adjustment tools before starting.
8. Keep all guards and covers in place during operation.
9. Never use hands to secure workpiece to table during operation—use
clamps or a vise.
10. Avoid positioning hands where they could slip into rotating bits or
tooling if workpiece unexpectedly shifts or you get distracted.
11. Always use a brush or vacuum to remove metal chips; DO NOT use your
hands, rags, or compressed air.
12. Never attempt to slow or stop spindle with hands or tools.
13. Always use proper feeds and speeds for operation and workpiece.
14. Never leave machine running unattended.
15. DO NOT operate when tired or under influence of drugs or alcohol.
17. DO NOT expose to rain or use in wet locations.
17. Prevent unauthorized use by children or untrained users; restrict access
or disable machine when unattended.
WARNING!
Power Requirement: 220V, 1-Ph, 15A, 70 Hz
Vertical Spindle Motor: 3 HP, 220V, 3-Ph, 9.3A
Horiz. Spindle Motor: 2 HP, 220V, 1-Ph, 8.7A
Table Travel: Cross 8-1/2", Long. 23-1/2"
Knee Travel: 12-1/2"
Vertical Spindle to Column Distance: 27-3/4"
Max. Dist. Vertical Spindle to Table: 14-1/2"
Horizontal Spindle to Table Distance: 14-1/8"
Vertical Spindle Travel: 5"
Headstock Tilt: 90° Left/Right
Headstock Rotation Around Column: 180°
Spindle Tapers: R-8
Weight: 1874 lbs.
Specifications
Date
S/N
Manufactured for Grizzly in China
READ and UNDERSTAND
instruction manual to
avoid serious injury. If a
manual is not available,
DO NOT use machine. Go
to www.grizzly.com or call
(800) 523-4777.
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
ENTANGLEMENT
HAZARD!
Always wear
ANSI-approved safety
glasses and face
shield when using this
machine.
EYE/FACE INJURY
HAZARD!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
701
702
703
704
705
703
701
706
707
708
709
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
REF PART # DESCRIPTION REF PART # DESCRIPTION
701 P0757Z701 ELECTRICITY LABEL 706 P0757Z706 MODEL NUMBER LABEL
702 P0757Z702 BIOHAZARD WARNING LABEL 707 P0757Z707 GRIZZLY GREEN TOUCH-UP PAINT
703 P0757Z703 DISCONNECT WARNING LABEL 708 P0757Z708 GRIZZLY PUTTY TOUCH-UP PAINT
704 P0757Z704 GRIZZLY OBLONG NAMEPLATE-SMALL 709 P0757Z709 GRIZZLY.COM LABEL
705 P0757Z705 MACHINE ID LABEL