Honeywell NXL Welding System User Manual


 
Receipt of delivery 13(96)
3
3. RECEIPT OF DELIVERY
NXL frequency converters have undergone scrupulous tests and quality checks at the factory before
they are delivered to the customer. However, after unpacking the product, check that no signs of
transport damages are to be found on the product and that the delivery is complete (compare the
type designation of the product to the code below.
Should the drive have been damaged during the shipping, please contact primarily the cargo
insurance company or the carrier.
If the delivery does not correspond to your order, contact the supplier immediately.
3.1
Type designation code NXL Compact
NXL
0005
V3
5
C
1
N
1
S
Harware modifications:
S = Standard
D = DIN rail mounting
Brake chopper
0 = No brake chopper (MF2)
1 = Internal brake chopper
EMC emission level
N = No EMC emission protection
(External filters available for EN61800-3 cat. C2)
Enclosure classification
1 = IP20
Control keypad
B = No control keypad
C = Standard 7-segment keypad
Nominal mains voltage
2 = 208-240Vac
5 = 380-500Vac
Input Phases
V3 = 3 Phase
Nominal current (low overload)
0005 = 5A etc.
Product range: NXL
Figure 3-1. NXL Compact type designation code for sizes MF2 and MF3