Filter
Top Products
Control Keypad 55(96)
7
7.4
Navigation on the control keypad
The data on the control keypad are arranged in menus and submenus. The menus are used for
example for the display and editing of measurement and control signals, parameter settings (chapter
7.4.2), reference values (Chapter 7.4.3) and fault displays (chapter 7.4.4).
The first menu level consists of menus M1 to E7 and is called the Main menu. The user can
navigate in the main menu using the Browser buttons up and down. The desired submenu can be
entered from the main menu using the Menu buttons. When there still are pages to enter under the
currently displayed menu or page, the last digit of the figure on the display is blinking and by
pressing the Menu button right, you can reach the next menu level.
The control keypad navigation chart is shown on page 46. Please note that the menu M1 is located
in the lower left corner. From there you will be able to navigate your way up to the desired menu
using the menu and browser buttons.
More detailed descriptions of the menus you will find later in this Chapter.
Location