Filter
Top Products
74(96) Control Keypad Honeywell
HoneywellHoneywell
Honeywell
7
Counters submenu (S6.8.1)
In the Counters submenu (S6.8.1) you can find information related to the frequency converter
operation times, i.e. the total numbers of MWh, operation days and operation hours passed so far.
Unlike the counters in the trip counters menu, these counters cannot be reset.
Note! The operation time counter (days and hours) runs always, when the power is on.
Page Counter
C6.8.1.1 MWh counter
C6.8.1.2 Operation day counter
C6.8.1.3 Operation hour counter
Table 7-6. Counter pages
Trip counters submenu (S6.8.2)
Trip counters (menu S6.8.2) are counters the values of which can be reset i.e. restored to zero. You
have the following resettable counters at your disposal:
Page Counter
T6.8.2.1 MWh counter
P6.8.2.2 Clear MWh counter
T6.8.2.3 Operation day counter
T6.8.2.4 Operation hour counter
P6.8.2.5 Clear operation time counter
Table 7-7. Trip counter pages
Note! The trip counters run only when the motor is running.
Example: When you want to reset the operation counters, you should do the following:
Figure 7-15. MWh counter reset
enter
STOP
I/O term
READY
STOP
I/O term
READY
STOP
I/O
term
READY
STOP
I/O
term
READY
nxlk26.fh8