Filter
Top Products
68(96) Control Keypad Honeywell
HoneywellHoneywell
Honeywell
7
7.4.7 System menu (S6)
The System menu can be entered from the main menu by pushing the Menu button right when the
location indication S6 is visible on the display.
The controls associated with the general use of the frequency converter, such as keypad settings, customised
parameter sets or information about the hardware and software are located under the
System menu
.
Below you will find a list of the functions available in the System menu.
Functions in the System menu
Code Function Min Max Unit Default Cust Selections
S6.3 Copy parameters
P6.3.1 Parameter sets
0
= Select
1
= Store set 1
2
= Load set 1
3
= Store set 2
4
= Load set 2
5
= Load factory defaults
6
= Fault
7
= Wait
8
= OK
S6.5 Security
P6.5.2 Parameter lock 0 1
0
0
= Change Enabled
1
= Change Disabled
S6.6 Keypad settings
P6.6.1 Default page 0 1.1
P6.6.3 Timeout time 5 65535 s 1200
S6.7 Hardware settings
P6.7.2 Fan control 0
0
0
= Continuous
1
= Temperature (only
sizes MF4 and bigger)
P6.7.3
HMI acknowledg.
timeout
200 5000 ms 200
P6.7.4 HMI number of retries
1 10 5
S6.8 System info
S6.8.1
Counters menu
C6.8.1.1 MWh counter KWh
C6.8.1.2
Operating days
counter
hh:mm:
ss
C6.8.1.3
Operating hours
counter
hh:mm:
ss
S6.8.2
Trip counters
T6.8.2.1 MWh trip counter kWh
P6.8.2.2
Clear MWh trip
counter
0
= No action
1
= Clear MWh trip counter
T6.8.2.3
Operating days trip
counter