Filter
Top Products
4 Connection
MITSUBISHI CNC
82
4.2.5 Connecting with Drive Unit
Connect the optical communication cables from the NC to the each drive unit so that they run in a straight line from the
NC to the drive unit that is a final axis. Up to 6 axes can be connected. Note that the number of connected axes is limited
by the NC.
(Note) Refer to "Precautions for Using Optical Communication Cable" when handling and wiring optical
communication cable.
Cable application table
Cable
Panel internal wiring Panel external wiring
Under 10m 10 to 30m 10m or less 10 to 30m
G396
○× × ×
G395
○× ○ ×
G380
○○ ○ ○