Filter
Top Products
E70 Series Connection Manual
4.5 Connection of MITSUBISHI CNC Machine Operation Panel
111
4.5 Connection of MITSUBISHI CNC Machine Operation Panel
(Note) In this chapter "MITSUBISHI CNC Machine operation panel" is shorten to Machine operation panel.
Connect Machine operation panel A to the remote I/O unit I/F of control unit or operation panel I/O unit.
- Machine operation panel A (RIOIN) - cable (FCUA-R211 or SH41) - control unit (RIO1)
- Machine operation panel A (RIOIN) - cable (FCUA-R211 or SH41) - operation panel I/O unit (RIO3)
When supplying power to control unit from Machine operation panel A, the following connection is necessary.
- Machine operation panel A (DCOUT) - cable (G071) - control unit (DCIN)
Connect Machine operation panel B to Machine operation panel A and control unit as follows.
- Machine operation panel B - cable (G460) - Machine operation panel A (SUBP)
- Machine operation panel B - cable (F120) - control unit (EMG)
[When connecting to operation panel I/O unit (RIO3)]
<Related items>
Cable drawing: "Cable: F120 Cable"
"Cable: FCUA-R211 Cable"
"Cable: G460 Cable"
"Cable: SH41 Cable"
"Cable: G011 Cable"
Connector pin assignment: "General Specifications: Operation panel I/O unit" (RIO3 connector/DCIN connector/
DCOUT connector/ RIOIN connector/SUBP connector/EMG connector/CG71 connector)
F120
EMG
FCUA-R211/SH41
G054
DCIN
KEYSW
DCOUT
RIOIN
SUBP
F070
(FCU7-KB926)
(FCU7-KB921)
DC24V
DC24V
FG
F070
EXT
G460
RIO3
CG71
CG71
DCIN
G011
HN232 Card
(Placed on the back of the panel A)
Machine operation panel A
Control Unit
Operation panel I/O Unit
Machine operation panel B
Only when relaying the power G071
When directly providing
the power