Palm m550 Welder User Manual


 
Setting Communication Preferences
217
8. When the Discovery Results screen appears, select the phone with which you
want to connect, and then tap OK.
9. Create a trusted pair with the phone. See “Adding trusted devices” earlier in
this chapter for details.
Network preferences
You can use your handheld’s Bluetooth technology and the software that is
included in the handheld operating system to connect with Internet service
providers (ISPs) or dial-in (remote access) servers using a mobile phone or optional
modem accessory. Your mobile phone must be equipped with one of the
following: an IR port, Bluetooth technology, or a serial cable that connects to your
handheld’s universal connector. You also need an ISP account or corporate remote
access account and a mobile phone carrier account that supports dial-up
connections, or a mobile phone carrier account with high-speed wireless data
network services.
You can also use your handheld’s Bluetooth technology and the software that is
included in the handheld operating system to connect with a LAN access point
To use the e-mail or web browser software included with your handheld, you must
create a configuration in Connection Preferences and then create Network
Preferences settings. See “Connection Preferences” earlier in this chapter for a
complete explanation of how to define Connection configurations that enable your
handheld to communicate with remote devices.
After you configure both the Connection and Network Preferences, you can
establish a PPP (Point-to-Point Protocol) connection with your ISP or dial-in
server. You can do this either by using menu commands from the Network
Preferences screen or by using a third-party application.
NOTE
The Network Preferences settings give you the ability to connect to your ISP
or dial-in server with applications that support viewing the transmitted data. Visit the
web site www.palm.com
for information on third-party applications that take
advantage of TCP/IP.
Tap here to select the phone with which you
want to connect
Tap Find More to discover additional phones