Filter
Top Products
Preparations
15
3
Control ID setting
If using more than one system controller, change
the addresses for each of them. The addresses
can be assigned to a number within the range of
0 to 4.
(Default setting: 0)
1
Move the joystick up or down to
select “5. CONTROL ID”.
[
ó
ñ
MAIN MENU †]
5.CONTROL ID: 0
2
Move the joystick to the left or right
to assign the address (Example: 3).
[
ó
ñ
MAIN MENU †]
5.CONTROL ID: 3
Available settings: 0−4
3
Move the joystick up or down to
select “14. SAVE/EXIT”, and then
move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4
Move the joystick to the left or right
to select “YES”, and then press the
ENT button.
[ SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will
return to the initial screen.
4
Termination setting
Set the termination for the system controller.
(Default setting: ON)
1
Move the joystick up or down to
select “6. TERMINATE”.
2
Move the joystick to the left or right
to set the termination.
[
ó
ñ
MAIN MENU í]
6.TERMINATE: ON
3
Move the joystick up or down to
select “14. SAVE/EXIT”, and then
move the joystick to the right.
[ó MAIN MENU ]
14.SAVE/EXIT ·
4
Move the joystick to the left or right
to select “YES”, and then press the
ENT button.
[ SAVE / EXIT ]
NO <YES>
The setting will be saved and the display will
return to the initial screen.
Menu settings (continued)