Sanyo VSP-3000 Welding System User Manual


 
Introduction
6
Safety Cautions
CAUTION
Do not connect to other equipment
The provided AC adapter and power cable are
exclusively for use with this unit. Connecting
to other equipment can cause fires or electric
shock.
Power cord
Damaging the power cord in the following
manner can cause fires or electric shock.
When the power cord is damaged, consult the
installer or the location of purchase.
Never place a heavy object on the power
cord, or expose to heating equipment, heated
surfaces (front surface of heaters), or direct
sunlight.
Do not stress the power cord with the weight of
the AC adapter unit.
Never bundle up the power cord during use.
Never bend, modify, or staple the power cord.
Power cord connection
Route the power cord and connecting cables
with care. Tripping over power cords can cause
injuries due to falls or falling equipment.
Connect power plug securely to outlet
Using with an incomplete connection can cause
fires due to overheating.
Do not place in unstable location
Place the unit in a stable location.
Placing the unit in an unstable location can
cause injuries or unit breakdowns, due to falling
or toppling equipment.
Always Observe These
Rules for Proper Use
Caring for the Unit
Unplug the power plug from the outlet.
Gently wipe away any contamination, using a
soft cloth.
When heavily soiled...
Immerse a cloth in neutral detergent thinned
with water, wring it well, and wipe the unit.
Finish with a dry cloth.
Cautions
Never use benzene or paint thinner to clean the
unit. The unit could discolor, or paint could be
removed.
When using chemically treated cloths, note the
cautions on the package.
Do not expose the unit to volatile chemicals such
as pesticides. Do not leave the unit in contact with
rubber or plastic products for long periods.
The unit could discolor, or paint could be
removed.
When not using for long periods
Unplug the power plug from the outlet.
However, this could damage the functions.
Connect the power and operate the unit
occasionally.