Filter
Top Products
Operation
25
FOCUS NEAR:
Adjusts the focus to the nearest object.
FOCUS FAR:
Adjusts the focus to the furthest object.
GO PRESET P:
The camera will move to the preset
position which has been recorded.
For details, refer to “Preset position
retrieval operation”. See page 26.
MEM.PRESET: ?:
Lets you record an object into a preset
setting.
For details, refer to “Preset memory
operations”. See page 26.
IRIS OPEN:
Increases the iris level setting.
IRIS CLOSE:
Decreases the iris level setting.
Operating the camera by changing
camera menu settings using the
system controller
1
Press the CAM MENU button.
The “OPEN CAM MENU?” menu will be
displayed.
OPEN CAM MENU?
PASSWORD[ ---- ]
2
No password is set initially, so simply
press the ENT button.
The camera’s menu screen will be displayed
on the monitor.
OPEN CAM MENU?
OK
OPEN CAM MENU?
CAM:002
SANYO SSP 19.2k
CAM:002 D1 CH02
While pressing the SHIFT/FUNC.
button, press the CAM MENU button to
exit the camera menu.
+
* Only available for the VCC-9500/9600/
9700/9800 series.
3
Use the joystick to select a menu, and
then press the ENT button to display
the sub-menu.
For details on menu operations, refer to the
operating instructions for the camera.
■
Camera operations (continued)