Filter
Top Products
Preparations
22
Camera settings
3
Baud rate setting
This sets the communication speed.
(Default setting: 19.2 Kbps)
1
Move the joystick up or down to
select “3. BAUDRATE”.
[
ó
ñ
CAM SETUP001 ]
3.BAUDRATE:19.2k
2
Move the joystick to the left or right
to select the communication speed.
Available settings:
2.4k, 4.8k, 9.6k, 19.2k, 38.4k, 57.6k
3
Move the joystick up or down to
select “7. SAVE”, and then move the
joystick to the right.
“OK” will be displayed and the settings will
be saved.
[
ó
ñ
CAM SETUP001 ]
7.SAVE ·
UP001 ]
OK
4
Move the joystick up or down to
select “8. EXIT”, and then move the
joystick to the right.
Returns to the initial screen.
[óCAM SETUP001 ]
8.EXIT ·
4
Pan and tilt speed setting
The speed of pan and tilt operations for the
camera is controlled by the degree of tilt of the
joystick.
(Default setting: OFF)
1
Move the joystick up or down to
select “5. PROP.”.
[
ó
ñ
CAM SETUP001†]
5.PROP.: OFF
Available settings:
ON: Variable
OFF: Constant
2
Move the joystick to the left or right
to select “ON” or “OFF”.
3
Move the joystick up or down to
select “7. SAVE”, and then move the
joystick to the right.
“OK” will be displayed and the settings will
be saved.
[
ó
ñ
CAM SETUP001 ]
7.SAVE ·
UP001 ]
OK
4
Move the joystick up or down to
select “8. EXIT”, and then move the
joystick to the right.
Returns to the initial screen.
[óCAM SETUP001 ]
8.EXIT ·