Filter
Top Products
Preparations
8
PWR Tx Rx
DVR: Digital video recorder
Escape/Power button (ESC/PWR)
ESC:
This is used to exit from the current operating
menu and return to the initial screen.
PWR:
When you press the button, the power turns
on and the PWR indicator on the power/
communication indicator panel illuminates.
The version information will be displayed in the
menu display, and then the initial screen will be
displayed.
(Version information)
SANYO VSP-3000
Ver:X.XX
•
(Initial screen)
SANYO SSP 19.2k
CAM:001 D1 CH01
If you press and hold the button for
approximately 3 seconds, “POWER OFF” will
be displayed. When you release the button, the
power will turn off.
SANYO SSP 19.2k
< POWER OFF >
Mouse button ( )
If the accessory USB cable is used to connect
a DVR with a mouse function (sold separately)
to the USB mouse port at the rear of the system
controller, the joystick can be used to operate the
cursor. (P29)
•
Menu display
This displays the information which is required for
menu settings.
Clear button (CLR)
This button is used to correct any character input
errors such as passwords.
Numeric buttons (0 to 9)
These are used to select camera numbers and for
character input.
Enter button (ENT)
This is used to confirm menu settings.
DVR operation button (P28)
Camera operation buttons
These are used to operate the cameras. (P20)
Joystick
This controls the pan (left and right), tilt (forward
and back) and zoom in and out (rotation)
operations of the camera. In addition, it is used
to select menu items which are appearing in the
menu display.
Power/communication indicator panel
PWR (Power): Illuminates when the power is
turned on.
Tx: Flashes while a command is being sent.
Rx: Flashes while a command is being received.
•
•
•
Front
Part names