Filter
Top Products
Preparations
21
1
Address setting
This selects the camera address.
All settings other than this one will be applied to
the selected address.
(Default setting: 001)
1
Move the joystick up or down to
select “1. ADDRESS”.
[ñCAM SETUP001†]
1.ADDRESS: 001
2
Move the joystick to the left or right
to select the address, and then press
the ENT button.
[ñCAM SETUP001†]
1.ADDRESS: 001
[ñCAM SETUP255†]
1.ADDRESS: 255
The address can also be selected
using the numeric buttons.
2
Protocol setting
This selects the protocol to be used for
communication.
(Default setting: SSP)
1
Move the joystick up or down to
select “2. PROTOCOL”.
[
ó
ñ
CAM SETUP001†]
2.PROTOCOL:SSP
2
Move the joystick to the left or right
to select the protocol.
The camera address will vary depending on
the protocol selected.
Available settings: SSP (001−127)
PEL-D (001−255)
HSSP (001−127)
3
Move the joystick up or down to
select “7. SAVE”, and then move the
joystick to the right.
“OK” will be displayed and the settings will
be saved.
[
ó
ñ
CAM SETUP001 ]
7.SAVE ·
UP001 ]
OK
4
Move the joystick up or down to
select “8. EXIT”, and then move the
joystick to the right.
Returns to the initial screen.
[óCAM SETUP001 ]
8.EXIT ·
SANYO SSP 19.2k
CAM:001 D1 CH01
Camera settings (continued)