Sanyo VSP-3000 Welding System User Manual


 
Introduction
3
WARNING
Never use when unit emits smoke,
unusual noises, or unusual smells.
Using under these abnormal conditions can
cause fires and electric shock.
Immediately unplug the AC adapter power plug
from the outlet, confirm that the smoke stops,
and then request repairs from the installer or the
purchasing source.
Never attempt to repair the unit on your own, as
this is dangerous.
Never disassemble or modify
Touching the internal parts is dangerous, and
can cause fires and electric shock.
Request internal inspection, adjustment, and
repairs from the installer or the location of
purchase.
Never get unit wet
This unit is not waterproof or dustproof. Do
not install where exposed to rain, excessive
humidity, or excessive dust. This can cause
fires and electric shock.
Do not install in a bath or shower room.
In the event that water enters the unit interior,
unplug the AC adapter power plug from the
outlet, and contact the installer or location
of purchase. Continued use can cause fires,
electric shock, and unit breakdowns.
Do not use during thunderstorms
Do not use this during thunderstorms.
In particular, never touch the AC adapter or
connection cables. This can cause electric shock.
Do not install in unstable location
The unit may fall or topple, causing injuries or
unit breakdowns.
In the event that the unit is dropped or the
cabinet is broken, unplug the AC adapter
power plug from the outlet, and contact the
installer or location of purchase.
Continued use can cause fires or electric
shock.
Do not use in locations with explosion
risk
Do not use in locations where flammable gas or
explosive gas may exist in the atmosphere. This
can cause ignition and explosion.
Fogging (Condensation)
Drops of water form on the outside of a glass
containing very cold water. Similarly, droplets
can form on the interior of this unit. This is
called fogging, or condensation.
Using the unit during fogging can cause a unit
breakdown.
Be careful of fogging when the environment
temperature changes suddenly, such as when
heating the room quickly.
Fogging does not occur while electrical current
is present.
When fogging could occur...
Turn OFF the unit power, and leave the unit
in its installed position for one to two hours
before use.
Main Unit
Safety Cautions