Filter
Top Products
Preparations
23
5
DVR address and channel
setting
This assigns the DVR address and channel
number to the selected camera.
For details, refer to “Camera address numbers
(default value)”. See page 31.
1
Move the joystick up or down to
select “6. DVR”.
The “01” setting assigned to the first DVR
will flash.
[
ó
ñ
CAM SETUP001†]
6.DVR:01 CH:01
2
Move the joystick to the left or
right to select the address for the
connected DVR (Example: 03), and
then press the ENT button.
The cursor will move to “01” and it will flash.
DVR address: 01−99
[
ó
ñ
CAM SETUP001†]
6.DVR:03 CH:01
3
Move the joystick to the left or
right to select the channel number
(Example: 16), and then press the
ENT button.
Channel number: 01−16
[
ó
ñ
CAM SETUP001†]
6.DVR:03 CH:16
4
Move the joystick up or down to
select “7. SAVE”, and then move the
joystick to the right.
“OK” will be displayed and the settings will
be saved.
[
ó
ñ
CAM SETUP001 ]
7.SAVE ·
UP001 ]
OK
5
Move the joystick up or down to
select “8. EXIT”, and then move the
joystick to the right.
Returns to the initial screen.
[óCAM SETUP001 ]
8.EXIT ·
Camera settings (continued)