Sanyo VSP-3000 Welding System User Manual


 
Introduction
4
CAUTION
Transport with care
Unplug the AC adapter power plug from the
outlet, confirm that connection cables are
disconnected, and transport carefully to avoid
dropping the unit or subjecting it to severe shock.
Cautions for care or long-term disuse
Unplug the AC adapter power plug from the
outlet. Caring for the unit with the AC adapter
connected can cause electric shock.
Cleaning the interior
For cleaning the interior, consult the installer
or the location of purchase. When dust
has accumulated inside the unit over time
without cleaning, this can cause fires or unit
breakdowns.
Installation location
This unit is comprised of precision electronic
parts. Never install in the locations described
below, as this can cause operation errors and
unit breakdowns.
In direct sunlight
In extreme humidity or where humidity
fluctuates wildly
Where water could be splashed
Near heating/cooling equipment or humidifiers.
Where cold air from air conditioners contact the
unit directly
Where dust is extreme
Near a spark source
Near magnetic objects
Near explosive materials
Where subject to vibration
DANGER
Only use with 100 to 240V power source
voltage.
This can cause fires and electric shock.
Never disassemble or modify
Touching the internal parts is dangerous, and
can cause fires and electric shock.
Never use as a DC power source unit.
Never get unit wet
Never submerge in water or get unit wet. This
can cause fires and electric shock.
Do not use in a bath or shower room.
In the event that water enters the unit interior,
unplug the power plug from the outlet, and
contact the installer or location of purchase.
Continued use can cause fires, electric shock,
and unit breakdowns.
DC plug
Power cord
Power plug
AC adapter
Safety Cautions
Provided AC Adapter