Filter
Top Products
Others
30
List of auxiliary commands for Sanyo cameras
The commands are examples of commands for the VCC-9500/9600/9700/9800 series.
Auxiliary
command
ON OFF Operation
1 Switch to Color Mode Pan/Tilt control 1 Switches a day/night camera to color
mode.
2 Switch to B/W Mode Pan/Tilt control 2 Switches a day/night camera to black
& white mode.
3 Switch to Day/Night Auto
Mode
Pan/Tilt control 3 Switches a day/night camera to day/
night automatic mode.
4 AUTO RETURN Function
ON
AUTO RETURN Function
OFF
For a description of the automatic
return function, refer to the instruction
manual.
5 GLOBAL ADDRESS
Function ON
GLOBAL ADDRESS
Function OFF
For Pelco-D only. Address 99 allows
all cameras to receive the command
and operate.
6 REMOTE SET REMOTE RESET Only enabled when alarm output 2 is
set to “REMOTE”. For details, refer to
the instruction manual.
7−−−
8 ALARM DISABLE
Function ON
ALARM DISABLE
Function OFF
Alarms cannot be received for a
set period of time during and after
operation of a PTZ camera.
For a description of the alarm disable
function, refer to the instruction
manual.
9 AUTO PURSUIT Function
ON
AUTO PURSUIT Function
OFF
VCC-9700/9800 series only.
For details on the automatic pursuit
function, refer to the instruction
manual.
* Auxiliary commands 1, 2 and 3 are also valid for day/night-type zoom cameras.
■
Appendices