Filter
Top Products
December 2002 TOSHIBA TEC 1 - 21 e-STUDIO160/200/250 ADJUSTMENT ITEMS
1.2.4 Function test
The function test checks each function of the copier. To enter the function test mode, follow the procedure
below, or enter the Service mode (*,#,*,*) and select the menu for the function test
<Key used in operation> <Display messages>
Power ON
SET
1 3
Select test menu
The following tests can be conducted in the Function test mode.
01. OPE. PANEL TEST
02. PRINT TEST
03. MODEM TEST *1 (Factory test)
04. SENSOR TEST
05. SRAM TEST
06. DRAM TEST
07. CLOCK IC TEST
08. SCANNER TEST
09. CODEC TEST
10. OUTPUT TEST
11. PRINTER BOARD TEST *2
*1: When the FAX kit (GD-1061) is not installed, the test is not present.
*2: When the PCL kit (GA-1031) is not installed, the test is not present.
FUNCTION TEST
01.OPE.PANEL TEST
02.PRINT TEST
03.MODEM TEST
or