Filter
Top Products
e-STUDIO160/200/250 ADJUSTMENT ITEMS 1 - 82 December 2002 TOSHIBA TEC
1.8.5 CCD unit
(a) Replacing the CCD unit
• Since the lens unit was precisely adjusted at the
factory, it must not be readjusted in the field or
some of its components must not be replaced. If
necessary, the lens unit should be replaced as a
unit.
• When replacing the CCD unit, remove the fol-
lowing 3 screws only. Do not loosen or remove
other screws.
Fig. 1-8-25
Screw Screw
Screw
Fig. 1-8-24
• Use sufficient care when handling the lens unit. Never hold the precision-adjusted area of the lens unit.
065-15-1
065-17-1 065-18-1