Filter
Top Products
December 2002 TOSHIBA TEC 1 - 77 e-STUDIO160/200/250 ADJUSTMENT ITEMS
1.8.3 Adjusting the carriage 1
(a) Installing carriage 1
When installing carriage 1, make adjustments in
the following manner:
1. Pass the lamp cable over the roller of carriage
2 and place carriage 1 on scanner.
2. Reliably hold the carriage 2 holding part to the
left side frame.
Fig. 1-8-11
3. Securely hold the carriage 1 holding part to the
left side frame.
4. Tighten 2 screws to secure carriage 1 to wire.
Fig. 1-8-12
Lamp cable
Carriage 2
Carriage 1
Lamp cable
Roller
Holding part
Holding part
Screw
Carriage 1
Screw
Carriage 1
Carriage 1
057-1
057-2