Filter
Top Products
e-STUDIO160/200/250 ADJUSTMENT ITEMS 1 - 62 December 2002 TOSHIBA TEC
(2) Compare the copy and the scale.
(3) In order to adjust the divisions of the scale, do as follows.
Notes: 1. An increase in the value corresponds to an increase in the division of scale (0.1 %/step).
2. Adjustment value is able to be input within the range of 0 - 255.
The default adjustment value is 128.
Power ON
0 5
SET Digital Keys SET INT START INT Power OFF
(Set the value) (Test copy)(Code)
3 0 4
Copy movement direction
Copied scale
Actual scale
01-04-09
b) Secondary scanning reproduction ratio
(1) Place the scale (horizontal to the copy movement direction) and make an A3/LD 100% copy.
or
START
or
START