![](http://pdfasset.owneriq.net/8/d7/8d74973b-9887-451a-ace7-517691521a0a/8d74973b-9887-451a-ace7-517691521a0a-bgd4.png)
December 2002 TOSHIBA TEC 5 - 9 e-STUDIO160/200/250 UPDATING THE FIRMWARE
The MS-DOS prompt screen shows the following:
(1) Type “mkrpcdsk” and press the [Enter] key.
The batch file is executed and the download disk creation program is started.
(2) Insert a blank floppy disk (Disk 1) in the drive and press the [Enter] key.
(3) Press the [Enter] key.
Formatting of Disk 1 begins.
05-03-001
05-03-002
05-03-003
05-03-004
05-03-005