Toshiba e-Studio250 Work Light User Manual


 
December 2002 TOSHIBA TEC 1 - 17 e-STUDIO160/200/250 ADJUSTMENT ITEMS
Code
618
620
635
641
642
648
649
650
652
665
673
685
688
Factor
F/W
F/W
F/W
F/W
F/W
F/W
F/W
F/W
F/W
Setting item
Default setting for mixed size originals
0: OFF
1: ON
* Setting 08-618 to 1 (ON) and 08-641 to
4 (alternate) simultaneously is not al-
lowed.
APS forced start (Exclude RADF)
0: Valid (One time pressing)
1: Reserved
2: Invalid
Process for last page (one-sided original)
at duplex copying
0: One-side copy
1: Double-sided copy (blank paper is
added to as the last even numbered
page to output the copy in the same
orientation with previous pages.)
Auto sort mode (when document is loaded
into DF)
Also set on panel.
0: Invalid 1: Staple 2: Sort 3: Invalid
4: Vertical and horizon. alternate
5: Sort offset
* Setting 08-641 to 4 (alternate) and 08-
618 to 1 (ON) simultaneously is not al-
lowed.
Sorter mode priority selection (at all clear)
Also set on panel.
0: NON SORT 1: STAPLE 2: SORT
3: Reseved 4: ALTERNATION
5: SORT OFFSET
6: NON SORT OFFSET
Initialization of finisher bin at all clear
0: Valid 1: Invalid
Magazine sort setting
0: Left-hand open 1: Right-hand open
2in1/4in1 setting
0: Horizontal write 1: Vertical write
Cascade operation setting
(e-STUDIO200/250 series)
0: No cascade
1: 1 2 (Endless stack included)
2. Reserved
Set PPC area default.
05: Adjust area, γ adjust store area
08: Setting (PPC-FUNC) area
(Except the counter values)
Resetting drum-related counters,
08-355, 08-401.
(Valid when 08-689 is set to 1.)
Paper feeding by turns at duplex copying
0: Invalid 1: Valid
UI shortcut key
0: Invalid
1: Valid (REDUCE/ENLARGE and ZOOM
UP/DOWN only)
2: Valid (Cassette paper size setting only)
3: Valid (All, REDUCE/ENLARGE, ZOOM
UP/DOWN, and cassette paper size
setting)
Mode
PPC
Memory
PPC
PPC
PPC
PPC
ALL
Expansion
PPC
Expansion
PPC
Expansion
PPC
Self-
check
Self-
check
PPC
PPC
Acceptable
value *1
0-1
0-2
0-1
0-5
0-6
0, 1
0-1
0-1
0-2
*1
0-1
0-4
Refer to
page
1-90
Image
quality
mode
Default
0
0
0
2
0
0
0
0
1
1
1
*1 : The entry of code enables automatic execution.