Filter
Top Products
December 2002 TOSHIBA TEC 1 - 65 e-STUDIO160/200/250 ADJUSTMENT ITEMS
(2) To establish a 2.0 ± 0.5 mm blank space on the right side of the copy, adjust using the following
procedure.
01-04-12
Power ON
0 5
SET Digital Keys SET INT START INT Power OFF
(Set the value) (Test copy)(Code)
4 3 2
Notes: 1. An increase in the value corresponds to an increase in the blank image (0.1 mm/step).
2. Adjustment value is able to be input within the range of 0 - 255.
The default adjustment value is 0.
f) Right margin
(1) While the original cover remains open, make an A4/LT-100% copy.
Copy movement direction 2.0 ± 0.5 mm
or
START
or
START
g) Bottom margin
(1) While the original cover remains open, make an A4/LT-100% copy.
(2) To establish a 3.0 ± 1.0 mm blank space on the trailing edge of the copy, adjust using the following
procedure.
Notes: 1. An increase in the value corresponds to an increase in the blank image (0.1 mm/step).
2. Adjustment value is able to be input within the range of 0 - 255.
The default adjustment value is 0.
Copy movement direction
3.0 ± 1.0 mm
01-04-14
Power ON
0 5
SET Digital Keys SET INT START INT Power OFF
(Set the value) (Test copy)(Code)
4 3 3
or
START
or
START