Filter
Top Products
December 2002 TOSHIBA TEC 1 - 81 e-STUDIO160/200/250 ADJUSTMENT ITEMS
Notes:
1. When winding the wire on the pulley, keep
the following points in mind.
• Do not wind the wire while twisting.
• Tensely wind the wire so that it will be
placed in contact with the pulley.
• Wind the wire without leaving gaps.
• Be careful not to allow the wound wire
to be shifted or come loose.
2. When fitting wire holder jigs, take care so
that the turns wound on the pulleys do not
move or unwind.
Fig. 1-8-22
<Relationship between wound turns and wire holder jigs>
Fig. 1-8-23
No gap should exist
Pulley
Ball terminal
Clip jig
Clip jig
Wire
Clip jig
065-12
065-13
065-14
No gap should exist