Filter
Top Products
December 2002 TOSHIBA TEC 1 - 1 e-STUDIO160/200/250 ADJUSTMENT ITEMS
E01 Paper jam inside the machine
E02 Paper jam near the fuser unit
E03 Paper remaining inside the machine at power on (Except
for ADF/RADF)
E04 to E07 Reserved
E08 Transporting jam inside the ADU
E09 Time out error that occurs at the paper feeding sensor
E10 Reserved
E11 Paper feeding jam at the ADU
E12 Paper feeding jam at the SFB
E13 Cassette 1 feeding jam
E14 Cassette 2 feeding jam (PFU)
E15 Cassette 3 feeding jam (PFP)
E16 Cassette 4 (CM) feeding jam (e-STUDIO200/250 series)
E17 to E18 Reserved
E19 LCF feeding jam (e-STUDIO200/250 series)
E20 to E30 Reserved
E31 Paper not reach to feed sensor from cassette 2, so paper
jam inside the main unit during cassette 2 feed
E32 Paper not reach to feed sensor from cassette 3 or 4, so
paper jam inside the main unit during the feed
E33 Paper not reach to feed sensor from LCF cassette.
(e-STUDIO200/250 series)
E34 Paper not reach to 2nd cassette feed sensor from cas-
sette 3 or 4. (Cassette 4 is e-STUDIO200/250 series)
E35 Paper jam in cassette 4 transport path
(e-STUDIO200/250 series)
E36 Paper jam in LCF transport path
(e-STUDIO200/250 series)
E37 to E40 Reserved
1. ADJUSTMENT ITEMS
1.1 Error Code List
While the error message or “Call for service” symbol is flashing, pressing the [CLEAR/STOP] key and
the [8] key on the digital keys at the same time shows one of the following error codes on the copy-
quantity indicator as long as those keys are pressed.
Classification Error code Machine status
Transporting jam in the main
body
Paper feeding jam
Transporting jam for the
optional trays